235-235mm New Creality 3D Ultrabase 3D Printer Platform Heated Bed Build Surface Glass Plate for CR-10 CR-10S …

Price: $15.99
Product prices and availability are accurate as of 2019-07-22 23:44:34 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Note :since this ultrabase made of temper treated glass , about 1%-3% of them have slight deformation which is not easy to be found during QC procession, if you meet ,can leave us message for free replacement. New Arrival with Big Creality Logo on the glassbed, may have a little negative impact to bottom adherence , if you mind, please do not order
Description 1: Plate thickness: about 3 mm
2:Hardness: Not tested, but it surface anti-scratch ability is very good,if not broken , could be use all the time
3:When printing finished, wait the heated bed cool down, then you just need a little strength to remove the parts by hand directly The easy ability to remove printed parts black side heated printing ?PVP solid glue?platfom tape
4:This product does not support metal-sensing auto-leveling 3d printers
5:Due to chemical reaction reason, the silicon coat side surface may peal off or been scratched if the nozzle too close to it or press on it directly, please take care of this when do leveling.
6:Platform stick ability also depend on filament the leveling of the platform, before you check out reason, do not easily leave us negative comments, many thanks for understanding, if you have problem, please contact us.
7: size 235-235mmm, suit for Creality Ender-3 /ender 3 pro and CR 20 3D printer
Use tips 1: Could fix the plate on the platform directly be clips
2: When fixed the plate, need to adjust the platform , leveling it and adjust the distance of nozzle to build plate, make sure the nozzle don't touch the plate at first print
3:When use heated bed to print, the temperatue for materials PLA :60°C-65°C; ABS:110°C-125°C; PC:100°C-130°C; Nylon:90°C-110°C; TPU:50°C-65°C When print PLA or ABS, the first layer should with transparency outlook, if not, the printing may fail, please check as follows: A: The distance from nozzle to platform is too far, please adjust this distance to suitable distance B:They are oil or sweat splotch

Product Features

1: When printing, make the printed object not easy to wrap up 2:When finished printing, could let user easy to remove the printed objects 3:Could be apply to heating PCB directly, could start printing at once,don't need to stick any tape or glues,when leveled, replace most platform plate in the market . 4:Anti-scratch, high hardness,not easy to be broken,surface flatness is less than 0.2mm

Write a Review