eSUN 3D Printer Filament: PETG
16 Colors to Choose From.
Extrusion Temperature Range: 230 Celsius to 250 Celsius. Most users print around 245 Celsius.
Plate temperature: 80~90 Celsius or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
Advantages of PETG: PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;
1KG net (approximately 2.2 lbs) Filament with Clear Spool
eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230¡C - 250¡C
Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"