Flex Magnetic Two Layer Print Hot Bed Sticker Build Surface Tape for 3D Printer Build Platform Heated Bed(180x180mm)

Price: $15.99
Product prices and availability are accurate as of 2020-09-19 11:57:10 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available Discontinued
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Features

Please make sure that the product has two parts. The blue part is the surface, another part back with 3m adhesive which should stick on the hot bed. Or you should adjust the 90 degrees direction if there is a weak magnetic The sheet adheres to a print bed to help the filament stick during printing warping The sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part Compatible with PLA/ABS/PETG filament, allow to print surface without additional adhesives or tape We advice the temperature of the hot bed should not exceed 80?

Write a Review