Pearl Green HTPLA 3D Printer Filament 1.75mm - 2.2lbs / 1kg - Made in The USA

Price: $15.25
Product prices and availability are accurate as of 2020-04-04 14:22:11 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

At USA 3D Filaments we use all American 3D printer filament manufacturers and injection molders to make everything you see here; from the 3D printer filament to the raw plastic spool.

HTPLA (High Temperature PLA) is stronger than ABS, PETG, Co-Polyester Blends and even most Nylons - our HTPLA stands up to the sanitizing heat of a dishwasher with no deformation - and yet, still prints just like a normal PLA 3D Filament no special equipment or nozzle temperatures needed.

Our HTPLA is made from trademarked NatureWorks Ingeo brand PLA and is 100% pure with NO harmful additives.

What makes our HTPLA (high temperature / high performance PLA) better:
  • Sealed inside a re-usable zip-top vacuum bag, easy to store & use when you are ready
  • FDA Compliant for Food Contact
  • New High Temperature PLA Resin - no deformation up to 125c (250f)
  • Easy Annealable Process to increase Heat Deflection Temperature (HDT)
  • Tensile Strength over 6,000psi
  • IZOD Impact Strength (notched) 40 Newtons!!


USA 3D Filament HTPLA Specifications:
  • Extrusion Temperatures: 235c +/- 10c
  • Bed Temperature: Not needed, but if your 3D printer has heated bed 40c-60c works great
  • Spool Diameter: 7.94" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.25"
  • 1 kg spool
  • Dimensional Accuracy: 0.03mm
  • HTPLA Density: 1.23 g/cm
  • Volume: 0.815 L
  • Length: 335 m (+/- 5%)

Product Features

Extrusion Temperatures: 235c +/- 10c Temperature PLA Resin - no deformation up to 125c (250f) IZOD Impact Strength (notched) @ 40 Newtons!! Easy Annealable Process to increase Heat Deflection Temperature (HDT) Tensile Strength @ over 6,000psi

Write a Review