PLA Plus Premium PLA Filament 1.75mm, 1 kg Spool, 3D Printer Filament for All 3D Printers(Olive Green)

Price: $18.99
Product prices and availability are accurate as of 2020-04-04 15:37:29 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available Discontinued
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

b> Why We Need Makeasy Premium PLA Filament for Our 3D Printers?
?Stick Well to the Bed & Layer Adhesion is Better?Compared to ABS, the Melting point of Premium PLA is higher, so the temp is 5-10C higher, the stickiness is more stable.
?More Durable Premium PLA & Strong Toughness?Made by pure biodegradable materials from USA. Premium PLA has lower shrinkage rate and performs pretty well even when printing larger models, is more durable and steady, has 10 times stronger toughness than normal PLA+, not brittle at all.
?No Tangling Clogging Issue?Optimized automatic winding production makes almost no tangling issue. Melt well, feed smoothly without clogging or bubble issue.
?Accurate 1.75 mm Diameter, More Consistent?Our machine install 2 card holders at the winding position. And the automatic monitoring device ensure the accuracy of the diameter.
?100% Environment-friendly, Non Toxic:?All of Makeasy filament have passed the RoHS, CE, FCC Directive.
?Strict Quality Control & Two-Year Warranty?Every Batch of Makeasy filament had been tested before packing. Our reliable customer service team will respond to you within 24 hours! You can purchase with full confidence.

Specifications
Spool Diameter: 7.87"; Spool Width: 3.78"; Hub Hole Diameter: 2.20"
Recommended Extrusion Temperature: 205°C - 225°C
Printing speed: 50-100 mm/s
Plate temperature: no heating required
Tolerance: 1.75 ± 0.05 mm
Bubbles: 100% no bubbles
Net weight: 1kg / roll; Gross weight : 1.3 kg / roll
Length: 1.75 MM (1KG) = 330-340M
Voltage (KGF): 10-15
Melting point: 14-18g / 10min (190 ?, 2.16 kg)

??Important Tips!?
?Avoid Getting Wet: Return any unused filament back to its resealable bag for future use and to ensure secure, optimal containment.
?Avoid Tangling Issue: Insert the thread into the hole after use.

Product Features

Material: PLA Plus - PLA Plus is more durable and steady than the normal pla filament Spool Diameter: 7.87" - Spool Width: 3.78" - Spool Hub Hole Diameter: 2.20" Recommended Extrusion / Nozzle Temperature: 205°C - 225°C, Orderly wrapped,Melt well,Feed smoothly and constantly without clogging or bubble issue Finest Material: Raw material from USA. Eco-friendly with good performance. Suit for most 3D printers and 3D pen (Prusa, Makerbot ect.) 100% Satisfaction Guarantee: 2-Year Warranty and 24*7 customer support with technical advice

Write a Review