Easy-printing PLA with better performance than ABS & PET! Proto-pasta's high-temp PLA v2. 0 is everything the original Kickstarter version should have been. This new formulation is higher performing, more obviously heat treatable, and lower cost. This tough PLA prints with ease, but has a potential heat deflection temperature () of as much as 140C (285F) depending on post-processing. This means parts retain more stiffness and form at higher temperatures (no warping on your sunny car dashboard). For maximum performance, your prints should be heat treated (I. e. crystallized) in an oven until you see a change from translucent to opaque. Yes, there is an obvious visual change indicating the improved performance! We had good luck in a lab oven at 110C (230F) for an hour or less. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the Oven to minimize distortion. Parts can be baked at a lower temperature (though must be above 60C for any change to occur) for a longer. These 500G spools are shipped on the industry's only fully recyclable corrugated paper spools with no metal or plastic parts. These extremely high quality spools are rigid, lightweight, attractive, and . They also have a larger than normal inner core improving printability of the last few layers of Material, especially on 2. 85mm diameters. The different designs on each spool are actual drawings, schematics, and Code from the equipment we manufacture your filament on. Enjoy! Contact Proto-pasta for more information.
Prints like standard PLA but with better than petabs temperature resistance after annealing. Comes on fully corrugated recyclable spool with standard dimension
Silver Smoke is a translucent Smoke color similar to tintend Windows
We recommend printing this material at 190c-230c. No heated bed is required but may improve printing some geometry
Temperature resistance of up to 140C is achieved by annealing after printing in an oven at 60c-110c
Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor