Stronghero3D 1.75mm PLA 3D Printer Filament Gold Silver Copper Bronze Brass Each 200gram Bundle Pack Spool - Dimensional Accuracy +/- 0.05mm

Price: $27.99
Product prices and availability are accurate as of 2019-04-23 11:37:22 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

There are many filament suppliers produce at high speed, the filaments are not well cooling and not dried enough, so keep lots of moisture inside .Moisture will make melt strength of filament decreased rapidly , and then bubbles,stringing, shrinking,warping,brittle,vacancy, etc , see some vacancy spread the surface on right vase of last photo above

Some customers said , 3DDPLUS pla black require higher temperature. Yes, that is right.

In traditional plastic industrial, many plastic processing at higher temperature and better melt strength is more expensive than that in lower temperature. The same kind of material which processing in higher temperature means better melt strength that is a key point performance in plastic processing since plastic should be melt flowing to shape. .

3DDPLUS pla has better melt strength, well cooling , dried and post treatment, less stringing, less shrinking, less warping,less vacancy when 3d printing, smooth and shiny model surface.

Product Features

1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)

PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With clear Silica Desiccant

Recommended Extrusion/Nozzle Temperature 195°C - 215°C (317°F - 415°F)

Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.95"

Length: 330m
,Net weight :1kg, Gross weight : 1.3kg

New raw materials PLA 4032D from USA Naturaworks Ingeo,no recycle no rework plastic inside

Quality You Can Trust
High Purity: PLA has low shrinkage rate, NO Warp, NO Burbles even print larger models perform well.
Strong Toughness: Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, NO Jam
Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.

Product Features

HIGH SMOOTH SURFACE-Perfect printed model result,bright shiny and mirror black surface. SMOOTHLY PRINT- Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder PREMIER MATERIAL - Raw materials are from USA,Euro, eco-friendly with good performance HIGH PERFORMANCE - Good shaping, no bubble, no jamming, no warping BEST QUALITY vs PRICE- Low cost no equal low quality, have tried , not bad to other expensive

Write a Review